RYBBS Setup Problems
--------------------
The most common problems that I've come across are the following:

  Problem                             Try This!
  -------                             ---------
Program won't start up or             This is probably the wrong COM port
very sluggish                         Use alternate COM port

Modem won't reset or accept           If you have a modem that only has a few
information from RYBBS program        wires you might try to set the NO CTS
                                      switch in your startup.bbs file. 

Local login repeats characters        Carrier Detect switch might be set wrong.
or phrases over and over              In a 2400 baud modem you should have the
                                      &D2 and &C1 modem commands in your
                                      modeinit.bbs file. (ie AT&C1&D1 etc )

RYBBS starts but you can't            Try setting Carrier Detect switch on
access via local log-on or            modem to false (don't force it true!)

Set DTR forced true                   Set appropriate switch false
from a modem switch

Zmodem not working                    You need to get the DSZ program into
                                      the RyBBS system directory and make sure
                                      that NO ZMODEM in startup.bbs is disabled

Not enough memory                     Get more memory

ENTER

