

          TeleShare DOS  Remote Access       Page 1




          This Product is Shareware, if you continue to use it

          Please Legalise your usage through Registration.



                             _______
                        ____|__     |               (R)
                     --|       |    |-------------------
                       |   ____|__  |  Association of
                       |  |       |_|  Shareware
                       |__|   o   |    Professionals
                     -----|   |   |---------------------
                          |___|___|    Member



          UPDATED:  December, 1994



          Table of Contents                                          page #

           1  Introduction                                              2
           2  What you need to use teleshare
           3  Basic Installation and Setup                              3
                   TsSETUP.exe - the setup program
           4  How to use the host program TSH.exe                       4
                   Setting up the modem to answer the phone
                   Starting the Host program                            5
                   Unloading the Host from memory                       6
           5  How to use the remote access program TSR.exe
                   Linking up with the Host computer
                   Starting the Remote program                          7
                   Unloading the Remote from memory.                    8
           6  How a remote session works
                   security
                   access indicator                                     9
           7  Modem sharing option                                     10
                   A modem sharing session                             11
           8  Other available programs                                 12
           9  SUPPORT and the ASP
                   ASP Introduction                                    13
                   Warranty
          10  Shareware vendor notice (if any)                         13






          TeleShare DOS  Remote Access       Page 2


          Note that the page numbering may only be approximate, due
          to ongoing editing.


          1 INTRODUCTION


          TeleShare/DOS allows you to run character mode DOS programs on
          a remote machine from the computer attached to your keyboard.
          The remote PC may be anywhere that you can setup a compatible
          telephone and modem link.  Teleshare is designed to fit into
          your work instead of adding a whole new interface and new set
          of work rules.  This means that the Teleshare toolset is very
          modular and changeable to meet your specific needs.  TeleShare
          also allows you to copy files in either or both directions
          with Xmodem, and also allows you to use any number of external
          protocols.  We have background and simultaneous two way
          utilities freely available.  TeleShare is designed to provide
          reliable most common denominator service;  that is the mix of
          capabilities to get most jobs done, with the option to add
          'frills' as needed.  It has a particular fit to some areas
          that more well known products avoid.  Particularly,
          TeleShare/Host is smaller than most of the competition with
          less reliance on advanced versions of DOS or Windows.  It
          takes about 8K itself, plus 6 to 8 for screens, without the
          need for newer versions of DOS and LOADHIGH.  This makes it
          more suitable for modern memory hungry database, spreadsheet,
          and word processing software that uses most of the available
          lower 640K DOS memory and wants to use big chunks of higher,
          over 640K, memory.  Note that protected mode software like
          MSWindows and dBase IV 2.0 do not run under the TeleShare
          host/remote.  TeleShare is designed for real character mode
          DOS programs.  You may also notice that timing sensitive
          software like chkdsk, format, and running under MSWindows may
          act 'quirky', because the Host/Remote resident software is
          actually high speed multi-tasking and timing conflicts can
          arise.  Please avoid 'compressing' your hard drive and similar
          timing sensitive activity while running Teleshare.  If you do
          such things remotely set them up in a batch file that shuts
          down Teleshare, then restarts it afterward.  You will often
          notice such issues when you try to access a floppy drive while
          Teleshare is resident.  The tutorial/demo shows the Host and
          Remote running under MSWindows at up to 38400 'baud', but more
          reliably at 19200.

          TeleShare fits Home/Business and Travel/Business needs with
          its ability to get along with existing software and get the
          job done.  Most modems are sold with communications software,





          TeleShare DOS  Remote Access       Page 3


          and most such software has an "Escape or Shell to DOS"
          function that will let you add-in, or share with, TeleShare.
          You can setup, dial, and generally use your familiar existing
          software and additionally or switch to TeleShare as needed.
          You can even use TeleShare to make toll/billable business
          calls on a two modem office PC while at home.  We use it to
          run Compuserve access software on the second PC from the
          first.  As you grow into it, you will likely discard chunks
          and possibly add other software to develop something that fits
          what YOU need.  You can extensively customise TeleShare to the
          point of making it basically invisible to your normal work if
          you like.


          Please see the REGISTER.TXT for product registration
          information.



          2 What you need to use TeleShare

          - DOS 3.1 or higher

          Communications hardware

          - At least 1 standard PC serial port in both the HOST and
          REMOTE computers.

          - 1 auto-answer async modem for HOST.
          - 1 async modem for REMOTE.

          - ( Or ) Standard null-modem connection between the
          computers.

          - To use the modem sharing option you need at least 2 serial
          ports and/or 2 standard modems on the HOST PC (modem sharing
          means calling a second PC, then making calls from it).  You
          may also use a direct connection from one PC to another with a
          modem to run the modem on the second machine.  However, the
          ANSI screen codes transmitted from a BBS on the third machine
          are incorrectly filtered to both local machines.  You may or
          may not find the results usable depending on your needs.

          The main remote control programs, TSH (TeleShare Host) and TSR
          (TeleShare Remote) are described in this manual along with
          general features the the remote menu.  Other portions are
          distributed with separate sub-manuals for faster specific
          on-line access.  This scheme allows for modular additions to





          TeleShare DOS  Remote Access       Page 4


          TeleShare or modularly adding TeleShare to other software
          distributions.  If you use or distribute a particular software
          package that could benefit from including TeleShare go ahead
          and do so.  The basic package is small, non-intrusive, and
          easily modified by adding other software for specific
          purposes.


          3 Basic Installation and Setup


          Once TeleShare is installed on your computer system, make sure
          the current directory (eg TELE) contains the TeleShare files
          and run the TsSETUP.EXE setup program.  Context sensitive help
          for every setting is displayed on the bottom of each screen.
          The bulk of the background explanations for TeleShare setup
          are in the separate manual file called TsSETUP.TXT.  Just the
          highlights are included here.  In general, TeleShare uses some
          manuals instead of one so you can find things faster.  For
          example, please see the EXAMPLES.TXT for additional examples
          using TeleShare with other dialers/terminals and file transfer
          tools.


          The TeleShare/SETUP catagories are:

          General Defaults Security Remote Transfer Modem Sharing

          The General Defaults catagory has the basic settings to 'get
          you going'.  Normally leave the settings at their defaults
          except for possible changes to the Communications Port
          (choices are 1 or 2) and the Baud rate (choices shown range
          from 2400 to 19200, and any value in the 300-115200 range is
          accepted).  Normally you should check that the settings are
          the same on both computers.  If you are using a direct serial
          connection, you might slow down one end or other (eg 65535 on
          one machine and 115200 on the other) if one machine is
          miss-behaving (especially with XT to 386 type connections).

          The Security catagory has Yes or No and the access password if
          you enter "Yes".

          The Remote catagory lets you 'tune' remote access.  You can
          change the hotkeys, polling timing, and Host/Remote mode
          indicator.  Normally the defaults should be fine.  If you use
          a null modem connection you can increase the nominal baud rate
          to something like 115200, and may prefer to change the polling
          pause to something like 5 to speed things up.





          TeleShare DOS  Remote Access       Page 5


          The Transfer catagory basically only knows about the special
          TeleShare/XMODEM transfer program, and LOG file settings.
          Normally try using the default settings before customizing
          unless you definitely want log files on or off.  If you do get
          file transfer errors, follow the TsSETUP instructions to get
          back up to speed.

          The Modem sharing catagory is designed to allow you to call
          another PC and use a second modem on that PC to make calls.
          This allows you to redirect toll charges and file transfers to
          the other PC's phone number and computer.

          Please read TsSETUP.TXT for more information on the setup
          program.  Its worth reading because it highlights many
          TeleShare features in gruesome detail.



          4 How to use the TeleShare HOST program TSH.EXE


          Generally, change to the sub-directory whenever you want to
          start either the HOST or REMOTE software and execute the
          appropriate BATCH file. (TSHOST.BAT) for HOST program or
          (TSREM.BAT) for remote.  (The batch files are quite simple.
          Look inside them to remove any mystery.)


          Setting up the modem to answer the phone

          TeleShare was written to work with other software including
          your current communications software.  This design allows it
          to occupy a minimal amount of memory while you run memory
          hungry applications.  It was also written to be used with
          non-Hayes compatible modems.  This version of TeleShare
          contains no Hayes specific initialization routines in the
          Remote or the Host.  This means that they make NO attempt to
          set the modem to auto answer.  The assumption is that you have
          already setup auto answer with other software, such as SCOMM,
          DIALER, or TELIX.


          Here are some of the simplest ways to do this.  (We're going
          to cheat and include some other commands at the same time.)

          1.  Use one of the external programs distributed with the
          basic TeleShare package to setup the modem for you, such as
          SCOMM, AT.COM, DIALER, or DIAL.  See the SCOMM.TXT, AT1-4.TXT,





          TeleShare DOS  Remote Access       Page 6


          DIALER.TXT, and so on.

          Direct entry or a batch file works too.

          The following line dials a modem on COM1.
          "ECHO ATDT4335189 > COM1"

          The next line sends a basic 'hangup' command to COM2.
          "ECHO ATH0 > COM2"

          If you want to tell your modem to answer on the first ring
          use:  "ECHO ATS0=1 > COM1"   Assuming COM1.  To answer on
          the second ring use "ECHO ATS0=2 > COM1".

          You can even send the initialization string to the modem
          in the same way:
          "ECHO AT&FE1Q0V0X4&C1&D2S11=55S7=70 > COM1".

          If you put several of these commands in a batch file, some
          will fail because there needs to be delays between commands.
          You can use the 'delay' character as part of the command for
          some modems, or you can use the DELAY.EXE included in the
          distribution:

          RESET.BAT
          ECHO OFF
          REM  a sample batch file to reset and setup the modem
          mode COM1 baud=9600 parity=n data=8 stop=1
          ECHO ATZ >COM1
          DELAY 1
          ECHO AT&FE1Q0V0X4&C1&D2S11=55S7=70 > COM1
          DELAY 1
          REM  Never answer the phone with ATS0=0
          ECHO ATS0=0
          DELAY 1
          REM  Load the remote TSR
          TSR


          You will likely find a SUBST.EXE that can be used to change
          COM1 to COM2 and vice versa in batch files.  Use "SUBST" by
          itself to get its usage help.  You can use "DELAY" to see its
          usage help.


          2.  On a Hayes modem throw the DIP switch that makes the modem
          answer the phone when it's ringing.  Which one?  See the modem
          manual.





          TeleShare DOS  Remote Access       Page 7


          3.  You should be able to use the communications software that
          came with your modem.  After all, it already 'knows all about'
          the modem.  You may be able to setup auto-answer then shutdown
          to avoid conflicts with TeleShare.  Its also worth exploring
          this option at some point just to verify how much the two
          pieces of communications software conflict.  When you find
          problems you will be able to avoid them in the future.  You
          can likely initially use the communications software, then
          shell to DOS, and run TSH or TSR.  If you have the
          MARKNET/RELNET public domain tools, you can shell out, then
          RELNET the communications software from memory and use
          TeleShare (the non-network mark/release equivalents are not
          recommended).  Using combinations of communications software
          can easily cause problems, which will lead you to exploring
          the next option.

          4.  You can use the DOS MODE command to set the port
          parameters and then use a DOS 'COPY' command to send the
          auto-answer init string to the modem. These DOS commands can
          be included in the batch file used to start the HOST program
          and you'll never need to worry about them again once they are
          correct.  This allows you to setup the batch file to start-up
          TeleShare and the major application(s) you plan to use it
          with.  You can also have TeleShare waiting in memory and only
          startup the modem with a batch file when needed.  This
          customization flexibility is the major reason that the default
          Remote and Host program setup uses batch files (see below).

          Use the MODE command to intialize the port to the protocol
          you're using or the modem string you are about to send won't
          be recognized by the modem.  Most of the time you can go into
          the communications software that you normally use (or that
          came with your modem) and see and test what it uses.  Print
          Screen its settings and put them in a file, say "DIALFILE" to
          be used by the setup batch file with a command like:

          COPY DIALFILE COM1:<RETURN>

          The 'AT' type commands in the DIALFILE should end with an
          <ENTER> or carriage return.


          Starting the Host program

          The TeleShare HOST program TSH.EXE is the one you need to run
          on the computer you are attempting to access from remote.

          This program is a TSR, or Terminate and Stay Resident program,





          TeleShare DOS  Remote Access       Page 8


          requiring only about 8K for the .EXE load module and will
          politely stay hidden as long as it's loaded, and will start
          helping you on command.  Another 6-8K is held for screen
          buffers.  TeleShare screens are updated in batches instead of
          trickles (like some other remote software), which means that
          the screen buffers take more ram.  The result is cleaner,
          snappier, screen updates.

          TSH.EXE monitors the PC and the modem and will allow the PC to
          be used from remote once it senses an incoming caller.

          You can always use the PC normally when TSH.EXE is loaded and
          if someone is using the system from remote then they can see
          what you do and you can see what they do with BOTH parties
          having equal control of the PC and the keyboard.  This meshes
          well with uses like real-time training sessions with remote
          callers.  Or some forms of project coordination/group
          calling.

          Both TSH.EXE and TSR.EXE obtain their runtime parameters from
          a file called TSCONFIG.CFG.  This is a BINARY file and you can
          only change the contents with the TeleShare/SETUP setup
          program TsSETUP.EXE described above.  The current file format
          has changed to allow a 115200 baud limit for direct serial
          connections (eg laptop to desktop).

          To run the HOST program change to the TELE sub-directory you
          created during the installation and enter the command
          'TSHOST'.  This batch file will load the TeleShare HOST progam
          TSH.  Once the program has informed you that the load was
          successful it is OK for a remote user to connect with the
          modem and start using the PC with the remote access part of
          TeleShare.

          There is no hotkey screen in the HOST program. It simply
          installs itself in memory and does its job of allowing a
          remote caller to use the PC.

          Unloading the Host from memory

          Enter "TSH U" from DOS to Unload the TeleShare HOST software
          from memory.  If you have loaded other resident software above
          it, then it will only be able to suspend itself.  Yes, you can
          use a TSR manager like MARKNET/RELNET to rip the TeleShare
          software out of memory.


          5 How to use the TeleShare REMOTE access program TSR.EXE





          TeleShare DOS  Remote Access       Page 9


          You must use the special remote program provided (TSR.EXE) to
          access the PC running the TeleShare HOST software (TSH.EXE).

          This program is a TSR, or Terminate and Stay Resident, program
          just like the TeleShare HOST program TSH.EXE.  TSR.EXE is
          itself called TSR and is a TSR program.  If this proves to be
          too confusing, just rename it.  How about "mote", as as short
          form of 'remote' and small?

          There is a special batch file called TSREM.BAT which can be
          used to start the remote access program. It is described in
          greater detail below following the section regarding linking
          up with the TeleShare HOST computer.


          Linking up with the HOST computer

          TeleShare was developed to be used with all kinds of modems
          and not just Hayes compatibles.  There are no routines built
          into the software to initiate a dial-up to the HOST computer.
          This helps reduce the runtime memory requirements.  Some of
          the following material will be somewhat repetitive if you have
          read from the beginning.

          1.  You can use any modem software that allows you to place
          the call then escape, or shell, to DOS without hanging up.
          Once you are back in DOS, you can run the setup batch file
          TSREM.BAT and press ALT-R (or whatever you have reset the
          hotkey to) to access the TeleShare REMOTE program on the
          remote computer.

          2. SCOMM and DIALER are the main teleshare dialers in this
          release.  TeleShare now includes more than one dialing tool,
          if you poke about.  The idea is that you can then pick and
          choose to meet your needs.

          3.  You can also link to the remote quite easily using the DOS
          'MODE' command and a few "ECHO" (as show above) or 'COPY CON
          COM1:' commands.

          Use the MODE command and set the port protocol.  Once set
          correctly... Any 'COPY CON COM1:' commands will send the
          strings you enter right to the modem.  Use the standard
          'ATDT???-????' string to initiate the dial and wait for a
          connection.  Check out the settings in the communications
          software that came with your modem (or whatever modem software
          you normally use) and copy their 'ATD_etc' commands.






          TeleShare DOS  Remote Access       Page 10


          Once the 'CARRIER DETECT' light is up on your modem or you
          hear the connection established over the speaker you're ready
          to run TSREM.BAT and begin accessing the HOST computer.


          Other

          See the EXAMPLES.TXT for examples using TeleShare with other
          dialers/terminals and file transfer tools.

          You can use our WIZARD utility to automate actions, including
          automatic backups.  It can often be found with the Hands On
          remote access package, and you can ask us for a copy when you
          register Teleshare.

          There are many other straight dial/connect programs
          available.  Any one should do the trick provided it does not
          drop CARRIER once it is established.  Its likely more
          important for you to use your existing dialing list for
          dialing then to switch to TeleShare, so test out that option.
          For example, TELIX allows you to exit once a call is completed
          without hanging up.

          If you have a DATA/TALK type async modem that is not Hayes
          compatible then you can still use TeleShare.  Just start your
          hand set call in the usual way and once you've thrown over
          from TALK to DATA and CARRIER is up you can load the TeleShare
          REMOTE software and begin using the HOST computer.


          This software can likely be used with higher speed
          connections, but the maximum tested speed with a modem is
          19.2K.  Teleshare has been used extensively at 115200 baud
          over a Lantastic null modem serial connection between a
          monochrome 286-10 HOST and a VGA 486-33 with the 486 easily
          handling information received from the 286 (both using 8250
          serial chips).  However, using the 486 as HOST is tricky with
          incomplete screen updates on the 286.  38400 baud works okay
          with the 486 HOST and slow 286 remote.  Another trick is to
          run one machine at a higher baud setting than the other.
          Experiment and use whatever works.  The best guarantee for
          reliability over 9600 baud is to install 16550 serial chips.
          For any speed you can use tap the ALT-L/ALT-R key set to
          generate an updated screen when the remote screen gets
          corrupted.  You may prefer to change your default polling
          pause (eg. to 5) from normal modem settings, if you use a null
          modem serial connection .






          TeleShare DOS  Remote Access       Page 11


          Starting the REMOTE program

          The REMOTE access part of TeleShare is the program you need to
          run to access the HOST computer running TSH.EXE.

          A special batch file is provided called TSREM.BAT which will
          perform the load for you.  Its main purpose it to allow you to
          ensure the program loads from the correct directory, and
          anything else that you wish to include in the batch file.

          You should be in the sub-directory where the TeleShare remote
          programs are located and enter 'TSREM' to initiate the load,
          at least until you edit the TSREM.BAT to include an
          appropriate change directory command set.

          Once the title screen appears and tells you the load has been
          successful then all you need to do to start using the HOST
          computer is hold down the ALT key and press 'R' (REMOTE).  If
          you've changed the ALT-R key to something that makes more
          sense to you via TsSETUP.EXE then press that key sequence to
          contact the remote HOST.

          You must already be connected before you press the hotkey or
          nothing will happen!  Worse yet, you can disrupt dialers by
          thumping them over the head with remote access commands trying
          to pry their way out the same serial port.

          The remote portion of TeleShare is a TSR (Terminate and Stay
          Resident) program.  You can stay in your own DOS and simply
          switch to the HOST computer's DOS at any time with the ALT-'R'
          hotkey, which will bring up the TeleShare Remote access screen
          on top of the current DOS task.  Use the ALT-'L' (or whatever
          you have reset it to with TsSETUP.EXE) hotkey to return to
          'local' DOS.


          Unloading the REMOTE from memory.

          Enter the DOS COMMAND 'TSR U'.

          This will instruct TSR.EXE to remove itself from memory. If no
          resident programs were loaded after TSR.EXE then the memory
          used by TSR.EXE will be returned to the total available.  Run
          TSREM.BAT again if you need to re-load the program.

          If any TSR's were loaded after TSR.EXE then it will only be
          able to suspend itself.  It should whine at you in this case.
          The RELNET utility can be used to scrub everything out of RAM





          TeleShare DOS  Remote Access       Page 12


          to meet your specifications (ask for it if you don't already
          have it).


          6 How a remote session works


          Once you have pressed ALT-R to call up the TeleShare REMOTE
          access screen the software will notify you that it is
          requesting a 'session update' from the HOST computer.

          If SECURITY is on then password(s) are verified at this time.

          It is necessary to obtain a complete session update (including
          a new video screen) each time you re-enter the hotkey terminal
          screen since things may have changed on the HOST computer
          since your last access.  This only takes a moment or two and
          you will then see the latest screen from the HOST on your own
          screen.  From this point on you are using the HOST computer as
          if you were sitting in front of it.

          There are a few things to keep in mind while using the HOST
          computer

          - If the HOST has a color monitor and the REMOTE has a
          monochrome monitor then all colors on the HOST screen will be
          converted to either HIGHLIGHT, NORMAL or REVERSE VIDEO on the
          monochrome side.

          - Keyboard echo will NOT be instant as it is when you are
          using your own DOS. Whether or not the delay is noticeable
          depends on the speed of the HOST computer, the baud rate and
          the Poll Timer Tick Rate.  Once you realize that no keys will
          be lost you will find yourself typing ahead without noticing
          any echo delay.

          - DOS commands that scroll the screen rapidly will not appear
          as they do when executed locally.  The updates are slower so
          the scrolling will show up in bursts with a momentarily
          'frozen' screen between the bursts.  Software that changes the
          display with windows should appear normally.  The screen
          images are temporarily accumulated in the memory buffer then
          blasted onto the monitor to avoid the 'watery' screen update
          characteristic of some other remote software.


          Access indicator ( Mode indicator )






          TeleShare DOS  Remote Access       Page 13


          Since the REMOTE program is a TSR and you can switch from your
          local DOS to the HOST machine's DOS it's necessary to be able
          to tell where you are!

          When the REMOTE TSR is loaded there will normally be a single
          character indicator in the upper right hand corner to tell you
          where you which DOS you're actually using.

          A highlighted 'L' - means you are using your 'L'ocal DOS.
          Press ALT-R to switch to the REMOTE computer.

          A highlighted 'R' - means you are using the 'R'emote DOS.
          Press ALT-L to return to your Local DOS.


          When you enter 'TSR U' and Unload the TeleShare REMOTE access
          program then the indicator will disappear the next time that
          portion of the screen is updated.

          You can also turn the indicator off permanently by
          reconfiguring the setup file with TsSETUP.EXE.


          7 Modem sharing option


          TeleShare has the ability to share a second modem attached to
          the HOST PC with the REMOTE user.  One modem is used to allow
          the REMOTE PC to access the HOST.  The other modem on the
          other com port can then be used by the REMOTE as if it were
          actually connected to the REMOTE.  Any modem software can be
          used on the REMOTE the same way that 'normal' software can be
          run remotely.  This allows you to load TSH.EXE on your
          computer at the office and ( if it has another modem ) call it
          from home and originate long distance calls to other systems
          from the office.  We use a variant of it here to dial up
          another computer then run Compuserve access software on the
          next com port, so the Compuserve charges match up with the
          appropriate phone number.


          Briefly, how to do it:

          1. Load TeleShare HOST on your office PC before you leave.  2.
          Call the office PC from your home PC.  3. Tell the office PC's
          second modem to call long distance with the charges going to
          the office number.  4. You can dial and upload/download files
          normally.





          TeleShare DOS  Remote Access       Page 14


          A modem sharing session

          In the explanations that follow and on some of the TsSETUP
          parameter screens the term 'primary' port refers to the one
          used to maintain contact with remote for modem sharing or
          normal TeleShare sessions. The term 'secondary' port refers to
          the com port with the extra modem attached which can be
          controlled by the remote PC connected via the 'primary' port.


          1. Make sure you have 2 modems on the HOST PC connected to
          both COM1 and COM2. The modem that will be used to maintain
          contact with the remote should be ready to answer the phone
          and connect when it rings. ( auto-answer ON ).


          2. Make sure all the TsSETUP.EXE parameters are OK. One of the
          modems will be used to maintain contact with the remote and
          the other will be the one controlled by the remote. Be sure
          the desired port assignments and baud rates match the desired
          hardware connection(s).  TsSETUP.EXE will not let you assign a
          baud rate to the 'secondary' port that is faster than the
          'primary'.


          3. Make sure you know what the designated signon and signoff
          passwords are. You must enter the passwords to start and stop
          the modem sharing session after you connect and they must be
          entered exactly the way they've been defined with the
          TsSETUP.EXE program 'over there'.  Its a good idea to run
          TsSETUP.EXE on the HOST and display the modem sharing
          parameters to discover the current signon/signoff passwords.

          NOTE:  The default signon PASSWORD = TSSTART and the default
          signoff PASSWORD = TSSTOP


          4. Make sure TeleShare HOST program TSH.EXE with modem option
          is loaded and resident on the PC with 2 modems.


          5. Call the HOST PC from the REMOTE PC.  If you are only
          connecting to change the origin of your calls, you do not need
          to load TeleShare on that machine.  When the word 'CONNECT'
          appears enter the 'modem sharing signon password.  'TSM OK'
          will appear on the screen if you enter the password correctly
          (case matters) and you can start your re-originating call.






          TeleShare DOS  Remote Access       Page 15


          The keyboard of the HOST PC will not operate as long as the
          HOST modem sharing session is active.  This prevents any HOST
          PC interference with the modem sharing.


          6. Once you are done, stop the modem sharing.  If you need to
          have a normal TeleShare session you need to restart 'from
          scratch'.


          7. Stop the HOST modem sharing session by typing your 'modem
          sharing signooff password', which will cause 'TSM EXIT' to
          appear on screen if you got your password right.  This process
          also unlocks that PC's keyboard.


          8. Exit your modem program on the REMOTE PC. You may now load
          ( or re-load ) the TeleShare REMOTE program TSR.EXE and have a
          normal DOS session with the HOST PC.

          NOTE:  The TeleShare REMOTE module TSR.EXE should never be
          memory resident when you run your modem software with the HOST
          modem sharing option.  Don't run TSH.EXE and TSR.EXE at the
          same time.  Hey, they argue with one another, so lets keep
          them separate.


          If TSR.EXE is already loaded

          -Change to TELE sub-directory.
          -Enter TSR U to Unload the TSR.
          -Change to your modem program sub-directory.
          -Call the HOST with your modem program, start the
           modem sharing with the right password.
          -Continue your modem terminal session until done.
          -Use the correct signoff password to stop the modem sharing
          -Exit your local modem program.
          -Change to the TELE subdirectory.
          -Enter TSREM and reload the REMOTE module.
          -Press ALT-R and continue your TeleShare session.


          If TSR.EXE is NOT loaded.

          -Change to your modem program sub-directory.
          -Call the HOST with the modem program start the
           modem sharing with the right password.
          -Continue your modem terminal session until done.





          TeleShare DOS  Remote Access       Page 16


          -Use the correct signoff password to stop the modem sharing
          -Exit your local modem program.
          -Change to the TELE subdirectory.
          -Enter TSREM and reload the REMOTE module.
          -Press ALT-R and continue your TeleShare session.


          Additional Notes on the modem sharing option

          - If you receive the signon acknowledgement string 'TSM OK'
          followed by an endless stream of garbage then this probably
          means you only have 1 com port on the HOST PC.  You must have
          at least 2 valid com ports on the HOST PC to use the remote
          modem access option.

          - Every time you change the primary COM port assignment with
          TsSETUP.EXE then you will notice that the SHARED modem COM
          port selection changes automatically to the other COM port (1
          or 2).  TeleShare supports only COM 1 or 2 at this time and
          the primary and secondary com port selections must always be
          different.

          - If you are using different baud rates for the modem sharing
          option then keep an eye out for transmission errors. There is
          no buffering of the data being passed and the success using
          different baud rates depends mostly on the speed of your CPU.
          Older machines's may have trouble using the modem sharing
          option with different baud rates.


           8 Other available programs

          December 15, 1994:
          Tsphone, telemenu, and tsdial are no longer in the
          default distribution.  SCOMM and DIALER handle
          phone lists and dialing.   TELEFILE handles DIALER
          or external dialers and external file transfer protocols.
          November 23, 1994:
          TSPHONE and TELEMENU will be somewhat altered or removed in
          future releases.  TSDIAL has been replaced by some other
          choices.



           9 SUPPORT and the ASP

          Please consider reporting the circumstances, preferably in
          written form, to technical support when you discover problems





          TeleShare DOS  Remote Access       Page 17


          with the software.

          For technical support, either call (604) 433-5189, or write to
          Suite 606 - 6455 Willingdon Avenue, Burnaby, British Columbia,
          Canada, V5H 4E4.  Both registered and soon to be registered
          users currently get the same support without any arbitrary
          time limit.  You may also try leaving a Compuserve message at
          75020, 2664, but be aware that messages rapidly 'scroll off'
          Compuserve.  The best electronic message area (also available
          from Compuserve) is via the internet at:

          INTERNET:vic_williams@mindlink.bc.ca.

          P. C. Softsmith Suite 606 6455 Willingdon Ave Burnaby, B. C.,
          Canada V5H 4E4




          ASP Introduction:

          Please also carefully read the accompanying SHR_WARE.TXT
          document.

          "This program is produced by a member of the Association of
          Shareware Professionals (ASP). ASP wants to make sure that the
          shareware principle works for you. If you are unable to
          resolve a shareware-related problem with an ASP member by
          contacting the member directly, ASP may be able to help. The
          ASP Ombudsman can help you resolve a dispute or problem with
          an ASP member, but does not provide technical support for
          members' products. Please write to the ASP Ombudsman at 545
          Grover Road, Muskegon, MI 49442 or send a CompuServe message
          via CompuServe Mail to ASP Ombudsman 70007,3536."


          Warranty

          THE DOCUMENTATION AND ASSOCIATED SOFTWARE ARE DISTRIBUTED AND
          SOLD WITH NO WARRANTIES, EITHER EXPRESS OR IMPLIED, REGARDING
          ITS MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
          THE INFORMATION IN THIS DOCUMENTATION IS SUBJECT TO CHANGE
          WITHOUT NOTICE AND DOES NOT REPRESENT A COMMITTMENT ON THE
          PART OF THE VENDOR.

          OTHER PRODUCT AND BRAND NAMES MENTIONED ARE TRADEMARKS OR
          REGISTERED TRADEMARKS OF THEIR RESPECTIVE HOLDERS.  FOR
          INFORMATION ONLY, PORTIONS OF THIS DOCUMENT AND THE SOFTWARE





          TeleShare DOS  Remote Access       Page 18


          ARE LICENSED COPYRIGHT MATERIAL COURTESY INTERLINK
          TECHNOLOGIES.


          10 ShareWare Vendor Notice (if any)

          If you are a shareware vendor, please feel free to replace
          this with your standard notice.












































