
          ========================================
         ||	        	 Program  Convert v 1.1      		  ||
         ||		 (c)  1999 Vyacheslav Tyulin        	  ||
         ||						  ||
          ========================================

Content:

1. The purpose of the program.
2. The status of the program.
3. Installation.
4. How to work with the program?
5. Registration.
6. How to contact the author in the event of questions or problems.

1. The purpose of the program.
This program is intended for conversion of one measurement units of this
or that physical quantity into others. The program includes metric, American,
British, old Russian systems of measurements. The following categories are
supported: weight, length, area, volume, force, pressure, energy, capacity,
speed, brightness, angular measure, time, dose, temperature.

2. The status of the program.
This is a shareware program, but you can use it free-of-charge without any
restrictions excluding the purpose of getting a profit. At the same time, user
can pass the program to the third persons without compensation. In order
to possess an updated variant it is necessary to register yourself.
The program is introduced for use on principle "As it is", that means that
the author is not responsible for any damage caused in the result of using
this program.

3. Installation.
To install the program it is necessary to unpack the file from the archive
CONVERT1.ZIP to any catalogue which is most convenient for you.
Hope you have already done that. File CONVERT.EXE is a self-extracting
(SFX)  archive.  Starting it you will be automatically led to unarchivation.
This procedure will be held to a directory from which file CONVERT.EXE
starts. If you don't like the proposed variant you may choose your own one,
that means that you may change the route of unarchivation. After that in the
chosen directory there will appear file Convert.exe, it will become a program
itself.

4. How to work with the program?
Working with the program does not require any special skills and is quite
simple for understanding. To convert physical quantity it is necessary
to choose the required characteristic in the list of parameters. Then in group
of converting in a field 'From' establish a reference value (in limits from 0
up to 1000000) and dimension of the parameter chosen before. The result
of converting will appear in a field 'In' in the chosen previously dimension,
where the number of digits after a point is defined in a field 'calculation
accuracy'. If the received value is more than 1, it is represented in the power
form.
Example:
1,5 E+03 (1,5 E-03), that means
1,5*10 in the power of  3(1,5*10 in the power of -3)
or 1500 (0,0015)

5. Registration.
For registration it is necessary to send E-mail: convert@SoftHome.net
with a note 'accept' in the field subject:, in the letter denote a country you
live in, then you pay $4,99 to the mentioned in Re: accept address of the bank.

6. How to contact the author in the event of questions or problems.
If in the process of the work any difficulty appears it is necessary to contact
the author to the address:
convert@softhome.net with the note 'question'.
The author will be thankful for all your remarks and advises as far as the work
of the program and its further development is concerned.

Wish you every success!



