  LINKS 386 Pro Upgrade

All versions of the LINKS 386 Pro software prior to version 1.11 do not 
allow the use of any of the Sound Blaster 16 or Sound Blaster Deluxe sound
boards. The LINKS 386 Pro Upgrade enables the use of these sound boards with
this software. 

This disk contains the following files-- 

   README.TXT
   LPRO121.EXE

NOTE: The LPRO121.EXE file is a self-extracting archive that upgrades the
      LINKS 386 Pro program to version 1.21.

In order to obtain a printout of this README.TXT file, insert this disk in
Drive A, make sure your printer is switched on, is on line, and at the C:\>
prompt, type the following command--

   PRINT A:README.TXT

and press <Enter>.

INSTALLATION

1.  Start up your computer.

2.  Insert this diskette in Drive A. 

3.  At the C:\> prompt, type in

       CD \LINKS386

    and press <Enter>.

 NOTE: In the above CD command, LINKS386 is the name of the LINKS 386 Pro
       directory on your system. If the name of the LINKS 386 Pro directory
       is not LINKS386, substitute the appropriate name in the place of
       LINKS 386 in this CD command line.

4.  Type in:

       COPY A:LPRO121.EXE

    and press <Enter>. This copies the LPRO121.EXE file from this disk to
    the LINKS 386 Pro directory on your hard drive.

5.  Type in

       LPRO121

    and press <Enter>. This begins the file's self-extraction process. 
    After a short period of time, the following message is displayed on the
    screen:

       PKSFX (W18) Warning! LINKS 386.EXE already exists.
       Overwrite (y/n)?

    Press <Y>. This replaces the older version of the LINKS386.EXE file
    with version 1.21 of this file.

    NOTE:
    "While reasonable efforts have been taken in the preparation of this
    information to assure its accuracy, Tandy Corporation/Radio Shack
    assumes no liability resulting from the use of the information
    contained herein."
