  SVGA 1024 NI Drivers (supports Windows 3.1) for 4825SX/4850EP - 2 of 2

*** Requires High Density Disk ***

These drivers enable the user to run several software applications
under the VGA 1024 video controller's Super VGA screen modes.


NOTE:

   * This drivers disk is DISK TWO of a two disk set. Make sure that
     drivers from DISK ONE are installed (as per the installation
     instructions in the README.DOC file on DISK ONE) before the
     installation from this disk is started.


This disk contains the following files--

   DISK.ID       FRAMEWRK.LIF   GEM3.LIF       LOTUS.LIF
   UTILITY.LIF   VGAMODE.EXE    WIN3.LIF       WP.LIF
   WS3_3.LIF     README.TXT


In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure your printer is switched on, is on line,
and at the C:\> prompt, type the following command--

   PRINT A:README.TXT

and press <Enter>.


The installation instructions and other information regarding these
drivers are included in the README.DOC file on DISK ONE. In order to
print the README.DOC file, insert DISK ONE in Drive A. At the C:\>
prompt, type in the following--

   PRINT A:README.DOC

and press <Enter>. The README.DOC file is approximately 43 pages long.

NOTE:
   * The installation instructions for drivers for Windows 3.1 are
     on Page 31 of the README.DOC file of DISK ONE.


NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."