* Windows 3.0/3.1 SVGA Drivers and Utilities for the 2500 SX/33

The Super VGA Drivers enable the user to run Windows 3.1 under
the Cirrus Logic video controller's Super VGA screen modes on the
TANDY 2500 SX/33 computer.

The TDACWAVE driver on this disk enables Windows to access the
sound chip. As a result, the user can utilize the sound capabilities
of Windows.

To run properly, the computer requires information about connected
devices and installed options. The computer stores this system
configuration information as well as the system date and time in
the CMOS RAM. The setup utility SETUP46.COM on this disk permits the
user to review and update the information stored in CMOS RAM.

Super VGA Drivers for Windows 3.0 are included in the WIN30 directory
on this disk


This disk contains the following files--

   SETUP46.COM   TDACWAVE.DRV  SETMODE.EXE   ACU.EXE
   AVGA2CFG.COM  VGALOGO.RL_   VGALOGO.LG_   WIN.CN_
   VDD542X.386   AVGA.3GR      VGACOLOR.2GR  OEMSETUP.INF
   README.TXT

   SYSTEM <DIR>
   EGA40850.FO_  EGA80850.FO_  CGA40850.FO_  CGA80850.FO_
   CGA40WOA.FO_  EGA40WOA.FO_  EGA80WOA.FO_  SSERIFE.FO_
   SERIFE.FO_    COURE.FO_     SYMBOLE.FO_   SMALLE.FO_
   ROMAN.FO_     SCRIPT.FO_    MODERN.FO_    TMSRE.FON
   HELVE.FON     16_1024.DRV   256_1024.DRV  8514FIX.FO_   
   8514OEM.FO_   8514SYS.FO_   SSERIFF.FO_   SERIFF.FO_    
   COURF.FO_     SYMBOLF.FO_   SMALLF.FO_    VGAFIX.FO_    
   VGAOEM.FO_    VGASYS.FO_    CGA80WOA.FO_

   WIN30 <DIR>
   README        VIDSETUP.BAT  AVGA.GR3      VIDMEM.COM
   VDD542X.386   VGACOLOR.GR2  CHGBN.COM     GETKEY.COM
   8514SYS.FON   8514FIX.FON   8514OEM.FON   CL.TXT


In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure the printer is switched on, is on line,
and at the C:\> prompt, enter the follwoing command--

   PRINT A:README.TXT

and press <Enter>.


INSTALLATION OF WINDOWS 3.1 VIDEO DRIVERS

1.  Start up your computer.          

2.  At the C:\> prompt, type 

       CD \WINDOWS
       
    and press <Enter>.

3.  At the C:\WINDOWS> prompt, type

       SETUP

    and press <Enter>.

4.  Use the direction keys to highlight "Display," and press
    <Enter>.

5.  Use the direction keys to highlight "Other," and press
    <Enter>.

6.  When prompted for the display drivers diskette, insert this
    disk into Drive A and press <Enter>. 
    
7.  A list of available drivers is displayed. Select a driver 
    compatible with your monitor type, and press <Enter>.
               
    NOTES: 
       * Refer to your computer or video adapter documentation
         and your monitor documentation for information about
         monitor type requirements for video modes. Drivers that 
         require 512KB of video memory are identified by the 
         notation 512KB.

       * The 256-color palettes for the gamma and non-gamma drivers 
         are defined differently. The gamma drivers match the color 
         scheme used by the 16-color drivers. The non-gamma drivers 
         use true colors and may enhance the display on very high 
         quality drivers. The gamma drivers are recommended.

8.  Respond accordingly to the prompts. When finished, the SETUP 
    program returns to MS-DOS.

9.  Run Windows. Windows will run in the new video mode and
    display the resolution of the driver you selected. Verify
    that the driver operates correctly.

    NOTE:     
       * If your Windows screen is not readable after installing the video
         driver, exit Windows. Then, rerun the Windows SETUP program from
         the C:\> prompt, and select a lower resolution.



INSTALLATION OF THE TDACWAVE DRIVER

1.  Start up your computer. 

2.  Insert this diskette in Drive A.

3.  At the C:\> prompt, type in

       CD \WINDOWS

    and press <Enter>.

4.  Type in 

       WIN

    and press <Enter>.

5.  Access the Main window.

6.  Run the Control Panel from the Main window.

7.  Select the Drivers icon.

8.  Select the Add button.

9.  In the List of Drivers box, select Add Unlisted or Updated Driver
    and then choose the OK button.

10. Change drive name displayed in the dialog box to A: the drive
    containing this disk.

11. Select the OK button.

12. Select Tandy DAC Wave from the list and choose the OK button. This
    should install the Windows Sound Drivers.



TO RUN SETUP FROM THIS DISKETTE

1.  Start up your computer.

2.  At the C:\> prompt, insert this disk in Drive A.

    NOTE:
       *This utility is not compatible with EMM386.EXE. To run this
        SETUP command option, you must delete or remark-out the
        EMM386.EXE line in the CONFIG.SYS file. If this is not done, 
        the following error message will result:

           This SETUP program does not support this computer.
           Press any key to continue....

3.  Type

       A:

    and press <Enter>.

4.  At the A:\> prompt, type

       SETUP46

    and press <Enter>. The Setup program screen is displayed.

5.  Respond appropriately to the directions at the bottom of the screen
    to select the options that reflect your system configuration.

6.  Press <F2> to update the information in CMOS RAM and restart the
    computer.



The installation instructions for the Super VGA Drivers for
Windows 3.0 are in the README file under the WIN30 directory. In
order to obtain a printout of this README file, insert this disk in
Drive A, make sure your printer is switched on, is on line, and at
the C:\> prompt, type the following command--

   PRINT A:README

and press <Enter>.


NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."
