  Windows 3.1 SVGA Drivers for 2500 SX/SX20/SX25/4020SX

*** Requires High Density Disk ***

These drivers enable the user to run Windows version 3.1 under
the video controller's Super VGA screen modes. The list of screen
modes is listed in the README.DOC file on this drivers disk. 

This disk contains the following files--

   8514FIX.FON    8514OEM.FON    8514SYS.FON    BW1024.DRV
   CGA40WOA.FON   CGA80WOA.FON   COURE.FON      COURF.FON
   DOSAPP.FON     EGA40WOA.FON   EGA80WOA.FON   MMWD4800.DRV
   MODERN.FON     OEMDISK1       OEMSETUP.INF   PVGA.GR2
   ROMAN.FON      SCRIPT.FON     SERIFE.FON     SERIFF.FON
   SMALLE.FON     SMALLF.FON     SSERIFE.FON    SSERIFF.FON
   SYMBOLE.FON    SYMBOLF.FON    V7VGA.3GR      VDDPVGA.386
   VGA1024.DRV    VGA800.DRV     VGAFIX.FON     VGALOGO.LGO
   VGALOGO.RLE    VGAOEM.FON     VGASYS.FON     WDVGANG.DRV
   README.DOC     README.TXT

   
In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure that your printer is switched on, is on
line, and at the C:\> prompt, type the following command--

   PRINT A:README.TXT

and press <Enter>.


The installation instructions for these drivers are included in the
README.DOC file on this diskette. In order to obtain a printout of
this README.DOC file, insert this disk in Drive A, make sure your
printer is switched on, is on line, and at the C:\> prompt, type
the following command--

   PRINT A:README.DOC

and press <Enter>.


NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."
