Connect^2 Remote v1.15
======================
       * Additional users were not always being defined to NETDIR.TAB
         when they are added to C2Remote.
       * v1.13.02 SMF-71 Encapsulation change disabled.  To reenable
         for users connecting to NGMHS hosts, put SMF71-Encapsulation=Y
         in the C2REMOTE.INI file.
       * Add RUNIT.BAT gateway support for the following environmental
         variables introduced in C2 v1.25:
          GWATTCOUNT, GWATT## & GWATTNAME##
          GWFROMUSER
          GWFROMHOST
          GWFROMEXT
          GWTOHOST
          GWTOEXT
          GWPRIORITY


Connect^2 Remote v1.14
======================
     * Fix for receiving mail addressed to a user name longer
       than 8 characters.  (Name was not being truncated to
       8 characters for local resolution.)
     * Encapsulate SMF-71 format addresses when sending, so that
       they can be accepted by an NGMHS host.
     * Side effect of the -c or -com# parameter is that it was
       causing the task switch clicker to be activating, causing
       C2Remote to make annoying noises while running.
       The task switch clicker parameter (-c) has been removed
       from C2Remote.


Connect^2 Remote v1.13
======================

* If an application (like Da Vinci Remote) insists on submitting messages
with USER@HOST format in the "From" field, then change any "USER@HOST"
addresses in the "From" field to "USER@WORKGROUP".

* Speed enhancements for configuration under Windows.

Connect^2 Remote v1.12.12
=========================

* -dm command line parameter for manual dialing was not working.

Connect^2 Remote v1.12.10
=========================

* Speed enhancements for preview mode under Windows.
* Fix for a problem where an application name would get deleted after
receiving a directory update.

Connect^2 Remote v1.12.09
=========================

* Additional environmental variable support added.
COMxFIFO=8250 forces COM port to be recognized as an 8250.
COMxFIFO=16550 forces COM port bo be recognized as a 16550.
C2MAXCOMMRETRIES=?? ups the default number of consecutive communications
retries that are allowed.  (Default is 6)

Connect^2 Remote v1.12.08
=========================

* If communications protocol is set to C2C-1, compress attachments
for network connections, as well as dial-up.

Connect^2 Remote v1.12.07
=========================

* Update comm library for Xircom ethernet/modem combo.

Connect^2 Remote v1.12.06
=========================

* Add O-C2-Routed-By: header, which gets added to message each time a C2
host routes a message.

Connect^2 Remote v1.12.05
=========================

* Fix for a problem where after a dial-in call, C2Remote would not make
any scheudled outbound calls.

* Fix for a problem where if a calling card number is more than 31
characters, where C2Remote would give a strange error about not being
able to open the log file.

* Fix for a problem with dir sync.  If C2Remote receives a dir sync message
from the configure "dir sync host", then it would always merge user routes,
even if the workgroup name ont he remote differed from the workgroup name
on the dir sync host.

* Added new menu option to review queued messages.

* Change routines that handle unwrapping wrapped SMF haeaders to be more
compatible with how Notework wraps addresses.

* Support for SMF-71 "Destination-application" header.


Connect^2 Remote v1.12
======================

* Delay aftering raising DTR changed from 1/10 to 1/2 second to stop 
"timeout waiting for modem" errors on some modems, especially battery 
powered modems.  (Setup option added in modem setup to allow 
configuration of this delay to add greater flexibility for tech support 
troubleshooting.)

* Fix for a problem running GATEWAY.BAT or RUNIT.BAT gateway batch files
under some versions of DOS with v1.11 of C2Remote only.


Connect^2 Remote v1.11
======================

* RMHS.EXE and RSETUP.EXE executables included to more closely emulate 
Remote MHS 2.0.  (RMHS and RSETUP take similar command-line parameters to 
Remote MHS 2.0, and allow a C2Remote diskette to be used in place of a 
Remote MHS diskette for the Da Vinci 3.0 installation routine.)  
RMHS/RSETUP also support the Remote MHS NAMES.INF file.

* MHSN.OVR file included (place in MHS\SYS directory).  The Coordinator 
for DOS expects to excute this program to run the MHS Connectivity 
Manager.  The C2Remote version of MHSN.OVR will run C2REMOTE instead.

* Configuration options added for running gateways always before and/or 
after regular communications.

* Improved handling of longer dial strings.  For dial strings longer than 
40 characters, C2Remote will automatically break the string up into 
separate dial strings to provide compatibility with modems that have 
limits on the length of allowed dial strings.

* Fix for a problem parsing multiple file attachments submitted by 
Coordinator for Windows.

* Fix for a problem requeueing messages across an internetwork connection 
if previously queued for async.

* Fix for -U parameter, will now work without -Q, and will update 
NETDIR.TAB with changes that were made to the C2REMOTE.INI file.

* Converted to use internal overlays with Blinker, to reduce memory 
requirements for running C2Remote in low memory situations.

