Display article   Subject:  720K, 3.5" Drive on HL
   04/30/97   18:18:02


720K 3.5-INCH DRIVE ON TANDY 3000 HL

To set up the 720K 3.5-inch disk drive with the Tandy 3000 HL,
under MS-DOS 03.20.01 or earlier (utilities diskette 01.02.00
or earlier), the following line must be added to your
CONFIG.SYS file:  DRIVPARM=/D:n /F:2 (n=0 if drive is first drive;
n=1 if drive is second drive).

When using MS-DOS 03.20.02 (with Utilities diskette 01.03.00) the
SETUP command has a drive type for the 3.5-inch drive.
