* Cordless Mouse (250-2006) Driver

This driver enables the user to utilize the Cordless Mouse on an
IBM PC, XT, AT, 386, 486, or compatible computer with an RS-232
serial port.


This disk contains the following files--

   MOUSE.COM
   TEST.COM
   README.TXT


In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure your printer is switched on, is on line,
and at the C:\> prompt, type the following command--

   PRINT A:README.TXT

and press <Enter>.



INSTALLATION

1.  Charge the mouse fully (as outlined on Pages 3 and 4 in the 
    User's Guide for this mouse). A mouse is fully charged and
    ready to use in about 15 hours.

2.  Start up your computer.

3.  Insert this disk in Drive A.

4.  Type

       MD C:\MOUSE

    and press <Enter>.

5.  Type

       COPY A:\*.* C:\MOUSE

    and press <Enter>. This copies the files from the drivers disk to 
    a directory called MOUSE on the hard drive.

6.  Type
    
       CD \MOUSE
    
    and press <Enter>.

7.  At the C:\MOUSE> prompt, type

       TEST

    and press <Enter>. A screen appears which lets you test the mouse's
    movement and buttons. For further description of this screen, refer
    to pages 6 and 7 of the User's Guide under the topic TESTING THE
    INSTALLATION.


NOTE:
   *To remove the Cordless Mouse Driver from the computer's memory,
    at the C:\MOUSE> prompt, type

       MOUSE /O

    and press <Enter>.


NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."
