GDS7548 WIN95 Everest Driver Release 1.35
User Installation Notes
1.  Click on the Start box in the lower left corner and proceed to Settings,
    Control Panel.
2.  Inside the Control Panel group, click on the Display icon to open the
    Display Properties folder and select the Settings tab (right most tab).
3.  Choose the "Change Display Type..." button and click the "Change..." 
    button in the Adapter Type group.
4.  Select the "Have Disk..." button and then insert the 754X WIN95 Driver 
    Installation diskette into the floppy drive A: or B: and proceed with 
    OK button.
5.  "Cirrus Logic 754X (Cirrus)" will be highlighted for a VLB system or 
    select "Cirrus Logic 754X PCI (Cirrus)" for PCI system.
6. Press OK and files are being copied from the diskette to your computer.
7. If a "Version Conflict" dialog box pops up and asks "Do you want to keep
   this file?", answer "No".
8. Press Close again to exit Display Properties folder.
9. Select Yes to restart computer before the new driver will take effect

How to change colordepth
========================

1. Make sure you have installed the Cirrus Logic 754X Win 95' driver (see
   How to Install 754X Win95 Driver section above).
2. Click on the Start box in the lower left corner and proceed to Settings,
   Control Panel.
3. Inside the Control Panel group, click on the Display icon to open the
   Display Properties folder and select the Settings tab.
4. Click on the pull-down arrow from the Color palette area to select color
   depth.
5. Choose OK to restart Win95.

How to change resolution
========================

1. Make sure you have installed the Cirrus Logic 754X Win 95' driver (see
   How to Install 754X Win95 Driver section above).
2. Click on the Start box in the lower left corner and proceed to Settings,
   Control Panel.
3. Inside the Control Panel group, click on the Display icon to open the
   Display Properties folder and select the Settings tab.
4. Ajust the sliding bar either to Less or More from the Desktop area.
5. Choose OK and new resolution will take effect.


How to change monitor refresh rate and display type
===================================================

1. Make sure you have installed the Cirrus Logic 754X Win 95' driver (see
   How to Install 754X Win95 Driver section above).
2. Click on the Start box in the lower left corner and proceed to Settings,
   Control Panel.
3. Inside the Control Panel group, click on the Display icon to open the
   Display Properties folder and select the Refresh tab.
4. You can change to different refresh rates for different resolution and/or 
   switching to different display type in the Active display area.


