INSTALLING WINDOWS 95 SOUND SUPPORT


Requirements
============
     * HP OmniBook 2000/5700 with Windows 95 installed.

     * OmniBook 2000/5700 Windows 95 Sound Drivers.  The drivers are located
       on the hard drive in the C:\OMNIBOOK\DRIVERS\WIN95\SOUND subdirectory. 
       These files are available after finishing the selection of Windows 95
       or Windows for Workgroups during the pre-install process.  The drivers
       are also located on the HP OmniBook Recovery CD in the 
       \OMNIBOOK\DRIVERS\WIN95\SOUND subdirectory.

Procedures
==========
1. Open the Control Panel and double-click on System.

2. Go to the Device Manager tab

3. Double-click on Other devices.

4. Remove all devices under Other devices.

5. Copy CWBAUDIO.INF in \OMNIBOOK\DRIVERS\WIN95\SOUND to the C:\WINDOWS\INF
   directory.

6. Click Close.  Shutdown Windows 95 and then press the reset button and
   reboot.

7. Windows 95 will recognize the CS4232 Sound Controller and prompt you for
   the drivers.  

       Select `Driver from disk provided by hardware manufacturer'.

8. Click Browse and go to \OMNIBOOK\DRIVERS\WIN95\SOUND on the Support 
   Recovery CD (or A:\ if you backed the drivers onto floppy disk)

9. Select the Crystal sound driver and click OK.

10. Click OK to install from disk.

11. Insert the Windows 95 Installation CD-ROM when prompted.

12. Click Yes to restart your computer.

